Difference between revisions of "LightPi"

From hms.sternhell.at
Jump to: navigation, search
(Configuration)
Line 100: Line 100:
 
{| border="1"
 
{| border="1"
 
|-
 
|-
| [[File:LightPi RTC-Module.jpg|thumb|left]]
+
| [[File:LightPi RTC-Module.jpg|thumb|left|LightPi RTC-Module.jpg]]
 
|-
 
|-
| Raspberry Pi Model 3 B (left) and<br/>Model A+ (right), outfitted with a<br/>DS3231 RTC module (a third one on the bottm left).
+
| Raspberry Pi Model 3 B (left) and<br/>Model A+ (right), outfitted with a<br/>DS3231 RTC module (a third one <br>on the bottom right).
 
|}
 
|}
  

Revision as of 02:20, 17 November 2016

Introduction

The Lightrouter

Up to now, the Lightrouter was our preferred workhorse for collecting and transmitting Lightmeter data. It's low-cost and low-power design allowed for continuous nightsky measurements, automatic data transmission and even - to some extent -  remote maintenance.

But, over time several issues surfaced: 

  • The hardware version 2 of the WR1043ND rendered our firmware image obsolete, leading to a more manual setup routine.
  • Future hardware versions will come with a locked firmware, preventing the use of OpenWRT (due to a new FCC rule).
  • In offline-scenarios (no NTP, and no GPS) the internal clock performed terrible, exhibiting nonlinear, irregular drifts.
  • The internal flash memory is not large enough to hold the entire setup, leading to the need of an overlay filesystem, creating a high dependency on the presence of the USB stick.
  • Due to ill-defined brown-out behaviour of the router, the filesystem of several USB sticks got corrupted, leaving the stations paralyzed.
  • Our central server died (summer 2016), leaving the reverse-SSH-tunnels dangling in mid-air, and thus preventing remote connections and data collection.
  • Power consumption with up to 18W is too much for solar powered off-grid stations.
  • Some gerneral reliability issues.


The LightPi

To combat all these shortcomings, the LightPi is under development. Based on a Raspberry Pi, extended by a realtime module, the LightPi will be easier to set up and to maintain, without increasing the price tag.

Some of it's main features are:

  • High and reliable hardware availability, good inter-generation compatibility.
  • Higher computing power and full debian-based operating system.
  • Lower power consumption (2-4W [Model 3 B], 0.5-1.2W [Model A+]). * 
  • 4 USB ports (Model B+ upwards), eliminating the USB hub.
  • SD-card instead of small onboard flash - no more overlay filesystems.
  • Highly accurate DS3231 RTC module (+/-3.5ppm).
  • Simple plug-and-play with any FAT32 formatted USB stick for data storage.
  • As inexpensive as the Lightrouter.

*...based on interpolation of various internet sources.

 

As the LightPi platform ist still under active development, several features are not yet implemented:

  • Remote shell access (partly implemented).
  • Data transmission/collection (planned).
  • NTP synchronsiation (planned).
  • GPS synchronisation (planned).
  • On-site network service for data access (planned).
  • Independence of a central server infrastructure (design guideline).

 

Current state

The LightPi project's current state is  developing / testing .

All the key networking capabilities have yet to be implemented, but the offline version is already up and running. First long-term reliability tests are currently in their starting phase.


Setup

Preparation

Hardware for the LightPi:

  • Raspberry Pi (any model)
  • DS3231 RTC module
  • MicroSD / SD card (dep. on RasPi model) with 4+GB
  • Power supply (5V, micro USB)
  • USB stick (FAT32 formatted)
  • For model A/A+/Zero USB hub
  • For model Zero: USB-OTG adapter
  • Optional, but recommended: A case for the RasPi

 

For the setup process you need:

  • Your computer
  • SD/MicroSD card reader
  • HDMI capable monitor
  • HDMI cable
  • USB mouse
  • USB keyboard

(The USB/HDMI items may be borrowed from your computer - no need for a second set.)

 

Optional, but highly recommended for the setup process:

  • Internet connection via WiFi
  • USB WiFi adapter (for all models except 3 B)

or:

  • Internet connection via Ethernet
  • USB Ethernet adapter (for models A/A+/Zero)

 

Configuration

LightPi RTC-Module.jpg
Raspberry Pi Model 3 B (left) and
Model A+ (right), outfitted with a
DS3231 RTC module (a third one
on the bottom right).

...



--Nero2401 (talk) 00:43, 17 November 2016 (CET)